Gasket Superlite oil 250 Asbestos

G/ GR ( other Colour on Customer requirement) . ASTM F 104 Line Call out : F 712121 E23 A9 M5 Test.. method Specified Value Unit Max. Peak Temperature 300 ° C Max. Operating Temperature 250 ° C Max. Operating Pressure 100 Kg/ cm² Density ASTM F 1315 1.70 - 2.0 g/ cm³ Compressibility ASTM F 36 J 7 -17 % Recovery ASTM F 36 J e 40 % Tensile Strength ASTM F 152 e 10.5 N/ mm² Stress Relaxation ( 16h 175° C) DIN 52913 e 22 MPA Gas Sealability ASTM F 37 B < 1.0 ml/ hour. ASTM oil no.3 ( 5h, 150° C) ASTM F 146 Thickness Increase d 15 % Weight Increase d 15 % ASTM Fuel B ( 5h, 23° C) ASTM F 146 Thickness Increase d 15 % Weight Increase d 15 % Water ( 5h, 100° C) ASTM F 146 Thickness Increase d 10 % Weight Increase d 10 % Superlite® SUPERLITE ASBESTOS FREE OIL STEEL-250 Gasket material based on Aramid fibre & organic fibre with NBR binder and steel wire reinforced. A premium metalic grade suitable for oils , fuels, lubricants , alcohols, gases, Hydrocarbons, steams, water, coolingliquids, mostdiluted acids and alkalies for medium stress conditions. The suitability of a gasket material for an application is dependent upon a multiplicity of factors as shown in the above diagram. Max. temperature and pressure values can not define the suitability for application. It is always advisable to consider these factors when selecting a material for a given application . All information and recommendations given in this brochure are correct to the best of our knowledge . This area refer , the gasket material is normally suitable subject to chemical compatibility. This area refer, the gasket material may be suitable but a technical support is recommended. This area refer, do not install the gasket without technical evaluation. Standard

Gasket Asbestos